Tips for the proper maintenance of your boiler like a pro

Gas Boiler

Checking the water pressure of the installation or bleeding the radiator are some maintenance actions that homeowners can carry out. 

In general, most homes have some types of boilers to heat the environment during the winter months. Regardless of the boiler model- gas, diesel, electric, biomass, etc.- the reality is that all of them require minimal maintenance for their operation to be optimal. Therefore, it may be asked who can perform the maintenance of the boiler? It is best to reach out to experts specializing in boiler maintenance since these professionals are responsible for a complete review of the entire system and installation. 

However, it is essential to acquire a series of good practices when keeping the boiler ready, which we are going to detail below. 

How does the environment affect the state of the boiler? 

Although a prior it may seem somewhat irrelevant, the truth is that weather conditions directly affect the state of the boiler. For example, in spaces where there is a lot of humidity. The boiler often presents difficulties in startups. In other words, there are performance problems that generate more expenses for homeowners.

Besides, in less automated combustion boilers, these types of variations in humidity can cause other operating problems, which are more related to increased emissions. For this reason, the climatic conditions of the environment must be adequate since they have a great impact on the performance of the boiler.

What pressure should the boiler installation have? 

Another issue that generates many doubts in people is the water pressure of the installation since in general, there is a great lack of knowledge regarding this factor. The ideal is to periodically check the water pressure while examining the state of the boiler circuit- it must be full- the outlet valves and the return valves- must be open. 

For the boilers controls to perform optimally, it is recommended that the water pressure is greater than 1 bar when cold- between 1 bar and 1.3 bar – that is, when the boiler is off. In the case of putting it into operation, the usual thing is that the pressure rises a little- ½ bar approximately- if the pressure gets too high, people should contact a boiler maintenance technician.  

When do you have to bleed the radiators? 

In all probability, this is one of the questions that most people ask themselves with the arrival of winter since it is time to tune up the various radiators in the home. For these elements to offer maximum performance, it is necessary to extract the air that they have accumulated throughout the year. 

But how often do you have to bleed the radiators? 

According to boiler controls and maintenance technicians, the ideals is to perform this action at least once a year, however, in some cases it must be done more frequently. And is that if the radiators make noise, people must carry out the operation. Of course, before purging the radiators, it is essential to disconnect them, stop the boiler and wait until the installation is completely cold.  

Tips on how to maintain broiler yourself 

A revised Burham Gas Boiler is more efficient and it is more a savings that we can see reflected in energy bills. To perform good maintenance we will give you 5 recommendations:

  1. Check pressure: 

There are occasions when the boiler does not work incorrectly or inefficiently, since with the passage of time the boiler loses pressure. It is necessary to check the pressure gauge is correct and if it is low, give it more pressure. If you are not sure to carry out this task, we recommend contacting the manual or calling a boiler technician. 

  1. The color of the flame

The boilers must present a flame that is light blue and quite intense. If the flame is strong yellow or smoky, there could be a problem with the flame and it is very important to call the technician to check.

  1. Warning signs, keep them in mind

Leaks, cracks or black soot marks, strange noises, are all signs that there is a problem. Check the boiler regularly and don’t forget to watch out for the warning signs. Detecting them early and repairing them will prevent more serious equipment failures.

  1. Keep respirators clutter-free

The external vents must also be free of obstacles. In many cases, the boiler is inside a garage, closet or storage room, etc. It is important to bear in mind that boilers need ventilation. The respirators are usually on the sides of the equipment and there should be no clutter or obstruction of them.

  1. Program the ignition

Sometimes the boilers can present a problem due to lack of use. Experts recommend turning the heater on for ten to fifteen minutes every now and then to avoid potential malfunctions when turning it on in the winter.